Essentials Premium Exam Engine - Download Free PDF Questions
Instant Download Essentials Free Updated Test Dumps
To prepare for the Fireware Essentials exam, WatchGuard offers various training resources, including online courses, instructor-led training, and study guides. The training materials cover all the topics tested in the exam and provide hands-on experience with Fireware products. Candidates are encouraged to take advantage of these resources to improve their chances of passing the exam.
NEW QUESTION # 43
From the SMTP proxy action settings in this image, which of these options is configured for outgoing SMTP traffic? (Select one.)
- A. Deny outgoing mail from theexample.comdomain.
- B. Prevent mail relay for theexample.comdomain.
- C. Rewrite theMail Fromheader for theexample.comdomain.
- D. Deny incoming mail from theexample.comdomain.
Answer: A
NEW QUESTION # 44
Which of these threats can the Firebox prevent with the default packet handling settings? (Select four.)
- A. Malware in downloaded files
- B. Viruses in email messages
- C. Access to inappropriate websites
- D. Port scans
- E. Denial of service attacks
- F. IP spoofing
- G. Flood attacks
Answer: D,E,F,G
Explanation:
Explanation/Reference:
B: The default configuration of the XTM device is to block DDoS attacks.
C: In a flood attack, attackers send a very high volume of traffic to a system so it cannot examine and allow permitted network traffic. For example, an ICMP flood attack occurs when a system receives too many ICMP ping commands and must use all of its resources to send reply commands. The XTM device can protect against these types of flood attacks: IPSec, IKE, ICMP. SYN, and UDP.
E: When the Block Port Space Probes (port scans) and Block Address Space Probes check boxes are selected, all incoming traffic on all interfaces is examined by the XTM device.
CG: Default packet handling can reject a packet that could be a security risk, including packets that could be part of a spoofing attack or SYN flood attack Reference: http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/intrusionprevention/ default_pkt_handling_opt_about_c.html%3FTocPath%3DDefault%2520Threat%2520Protection%7CAbout%
2520Default%2520Packet%2520Handling%2520Options%7C_____0
NEW QUESTION # 45
A local branch office VPN tunnel route is configured as shown in this image.
On the remote peer device, what must be configured as the remote network address for this tunnel route? (Select one.)
- A. 10.0.20.0/24
- B. 10.0.10.0/24
- C. 10.0.1.0/24
Answer: B
NEW QUESTION # 46
After you enable Gateway AntiVirus, IPS, or Application control, how can you make sure the services protect your network from the latest known threats? (Select one.)
- A. Enable automatic signature updates.
- B. Configure reputation Enabled Defense.
- C. Enable HTTPS deep inspection.
- D. Enable default packet handling.
Answer: A
NEW QUESTION # 47
An email newsletter about sales from an external company is sometimes blocked by spamBlocker. What option could you choose to make sure the newsletter is delivered to your users? (Select one.)
- A. Set the spamBlocker action to quarantine the email for later retrieval.
- B. Add a spamBlocker subject tag for bulk email messages.
- C. Set the spamBlocker virus outbreak detection action to allow emails from the newsletter source.
- D. Add a spamBlocker exception based on the From field of the newsletter email.
Answer: B
NEW QUESTION # 48
Which diagnostic tasks can you run from the Traffic Monitor tab of Firebox System Manager? (Select four.)
- A. DNS lookup
- B. Ping
- C. Traceroute
- D. TCP dump
- E. Reputation lookup
- F. MAC address lookup
Answer: A,B,C,D
Explanation:
Explanation/Reference:
From Firebox System Manager, you can run diagnostic tasks to review information in all the log messages from your Firebox or XTM device. This can help you debug problems on your network.
1. On the Traffic Monitor tab, right-click a message and select Diagnostic Tasks.
Or, select Tools > Diagnostic Tasks.
2. From the Task drop-down list, select the task to run.
Ping IPv4
Ping IPv6
traceroute
DNS Lookup
TCP Dump
Reference: http://watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/fsm/ log_message_learn_more_wsm.html
NEW QUESTION # 49
A user receives a deny message that the installation file (install.exe) is blocked by the HTTP-proxy policy and cannot be downloaded. Which HTTP proxy action rule must you modify to allow download of the installation file? (Select one.)
- A. WebBlocker
- B. HTTP Response > Header Fields
- C. HTTP Request > Authorization
- D. HTTP Response > Body Content Types
- E. HTTP Request > Request Methods
Answer: D
Explanation:
http://www.watchguard.com/training/fireware/82/httppro8.htm
NEW QUESTION # 50
How can you include log messages from more than one Firebox in a single report generated by Dimension? (Select two.)
- A. Create a report schedule that includes all the devices you want to include in the report.
- B. Export report data as a single PDF file for all the devices you want to include in the report.
- C. You cannot see report data in Dimension for more than one device.
- D. Create a device group and view the reports for that group.
Answer: A,D
NEW QUESTION # 51
How can you prevent connections to the Fireware Web UI from computers on optional interface Eth2?
(Select one.)
- A. Remove Any-Optional from the To list of the WatchGuard Web UI policy.
- B. Remove Any-Optional from the From list of the WatchGuard policy.
- C. Remove Any-Optional from the From list of the WatchGuard Web UI policy
- D. Remove Eth2 from the Any-Optional alias.
- E. Remove Any-Optional from the To list of the WatchGuard policy
Answer: C
NEW QUESTION # 52
Clients on the trusted network need to connect to a server behind a router on the optional network.
Based on this image, what static route must be added to the Firebox for traffic from clients on the trusted network to reach a server at 10.0.20.100? (Select one.)
- A. Route to 10.0.20.0, Gateway 10.0.2.254
- B. Route to 10.0.10.0/24, Gateway 10.0.10.1
- C. Route to 10.0.20.0/24,Gateway 10.0.2.254
- D. Route to 10.0.20.0/24,Gateway 10.0.2.1
Answer: A
NEW QUESTION # 53
To prevent certificate error warnings in your browser when you use deep content inspection with the HTTPS proxy, you can export the proxy authority certificate from the Firebox and import that certificate to all client devices.
- A. True
- B. False
Answer: A
NEW QUESTION # 54
Match the monitoring tool to the correct task.
Which is not a Fireware monitoring tool? (Select one)
- A. Firebox System Manager - Authentication list
- B. Log Server
- C. FireBox System Manager - Blocked Sites list
- D. Traffic Monitor
- E. Firebox System Manager - Subscription services
- F. FireWatch
Answer: B
Explanation:
Explanation/Reference:
The Fireware monitor and configuration tools are: Edge Web Manager, Firebox System Manager, HostWatch, and Ping.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 55
Which of these options are private IPv4 addresses you can assign to a trusted interface, as described in RFC 1918, Address Allocation for Private Internets? (Select three.)
- A. 10.50.1.1/16
- B. 192.168.50.1/24
- C. 198.51.100.1/24
- D. 172.16.0.1/16
- E. 192.0.2.1/24
Answer: A,B,D
NEW QUESTION # 56
Which of these threats can the Firebox prevent with the default packet handling settings? (Select four.)
- A. Malware in downloaded files
- B. Viruses in email messages
- C. Access to inappropriate websites
- D. Port scans
- E. Denial of service attacks
- F. IP spoofing
- G. Flood attacks
Answer: D,E,F,G
NEW QUESTION # 57
Users on the trusted network cannot browse Internet websites. Based on the configuration shown in this image, what could be the problem with this policy configuration? (Select one.)
- A. The HTTP-proxy allows Any-Trusted and Any-Optional to Any-External.
- B. The default Outgoing policy has been removed and there is no policy to allow DNS traffic.
- C. The HTTP-proxy policy has higher precedence than the HTTPS-proxy policy.
- D. The HTTP-proxy policy is configured for the wrong port.
Answer: B
NEW QUESTION # 58
Users on the trusted network cannot browse Internet websites. Based on the configuration shown in this image, what could be the problem with this policy configuration? (Select one.)
- A. The HTTP-proxy allows Any-Trusted and Any-Optional to Any-External.
- B. The default Outgoing policy has been removed and there is no policy to allow DNS traffic.
- C. The HTTP-proxy policy has higher precedence than the HTTPS-proxy policy.
- D. The HTTP-proxy policy is configured for the wrong port.
Answer: B
NEW QUESTION # 59
Match each WatchGuard Subscription Service with its function.
Controls access to website based on content categories. . (Choose one).
- A. Application Control
- B. Intrusion Prevention Server IPS
- C. Gateway / Antivirus
- D. Reputation Enable Defense RED
- E. WebBlocker
Answer: E
Explanation:
WebBlocker controls access to the good and bad places that are reachable on the web,preventing users from gaining access to sites that have evil intentions.
If you configure WebBlocker to use the Websense cloud for WebBlocker lookups, WebBlocker uses the Websense content categories. A web site is added to a category when the content of the web site meets the criteria for the content category.
Reference:http://www.tomsitpro.com/articles/network-security-solutions-guide,2-866-6.html
NEW QUESTION # 60
Which of these threats can the Firebox prevent with the default packet handling settings? (Select four.)
- A. Malware in downloaded files
- B. Viruses in email messages
- C. Access to inappropriate websites
- D. Port scans
- E. Denial of service attacks
- F. IP spoofing
- G. Flood attacks
Answer: D,E,F,G
Explanation:
B:The default configuration of the XTM device is to block DDoS attacks.
C: In a flood attack, attackers send a very high volume of traffic to a system so it cannot examine and allow permitted network traffic. For example, an ICMP flood attack occurs when a system receives too many ICMP ping commands and must use all of its resources to send reply commands. The XTM device can protect against these types of flood attacks: IPSec, IKE, ICMP. SYN, and UDP.
E: When the Block Port Space Probes (port scans) and Block Address Space Probes check boxes are selected, all incoming traffic on all interfaces is examined by the XTM device.
CG: Default packet handling can reject a packet that could be a security risk, including packets that could be part of a spoofing attack or SYN flood attack
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#en-US/intrusionprevention/default_pkt_handling_opt_about_c.html%3FTocPath%3DDefault%2520Thr eat%2520Protection%7CAbout%2520Default%2520Packet%2520Handling%2520Options%7C__ ___0
NEW QUESTION # 61
You can use Firebox System Manager to download a PCAP file that includes packet information about the protocols that manage traffic on your network.
- A. True
- B. False
Answer: A
NEW QUESTION # 62
Which of these actions adds a host to the temporary or permanent blocked sites list? (Select three.)
- A. Add the site to theBlocked Sites Exceptionslist.
- B. On the Firebox System Manager >Blocked Sitestab, selectAdd.
- C. Enable theAUTO-block sites that attempt to connectoption in a deny policy.
- D. In Policy Manager, selectSetup> Default Threat Protection > Blocked Sitesand clickAdd.
Answer: B,C,D
Explanation:
A: You can configure a deny policy to automatically block sites that originate traffic that does not comply with the policy rulese
1.From Policy Manager, double-click the PCAnywhere policy.
2.Click the Properties tab. Select the Auto-block sites that attempt to connect checkbox.
Reference:https://www.watchguard.com/training/fireware/80/defense8.htm
C: The blocked sites list shows all the sites currently blocked as a result of the rules defined in Policy Manager. From this tab, you can add sites to the temporary blocked sites list, or remove temporary blocked sites.
Reference:http://www.watchguard.com/training/fireware/82/monitoa6.htm
D: You can usePolicy Manager to permanently add sites to the Blocked Sites list.
1.select Setup > Default Threat Protection > Blocked Sites.
2.Click Add.
The Add Site dialog box appears.
Reference:http://www.watchguard.com/help/docs/wsm/xtm_11/en-US/index.html#cshid=en-
US/intrusionprevention/blocked_sites_permanent_c.html
NEW QUESTION # 63
In the network configuration in this image, which aliases is Eth2 a member of? (Select three.)
- A. Any-External
- B. Any-Trusted
- C. Optional-1
- D. Any-optional
- E. Any
Answer: C,D,E
NEW QUESTION # 64
From the Firebox System Manager >Authentication List tab, you can view all of the authenticated users connected to your Firebox and disconnect any of them.
- A. True
- B. False
Answer: A
Explanation:
http://www.watchguard.com/help/docs/wsm/xtm_11/en-us/content/en-us/fsm/authentic_users_wsm.html
NEW QUESTION # 65
Which of these options must you configure in an HTTPS-proxy policy to detect credit card numbers in HTTP traffic that is encrypted with SSL? (Select two.)
- A. Application Control
- B. Deep inspection of HTTPS content
- C. WebBlocker
- D. Gateway AntiVirus
- E. Data Loss Prevention
Answer: B,E
NEW QUESTION # 66
Which tool can add an IP address for the Firebox to permanently block? (Select one)
- A. Firebox System Manager - Authentication list
- B. FireBox System Manager - Blocked Sites list
- C. Traffic Monitor
- D. Log Server
- E. Firebox System Manager - Subscription services
- F. FireWatch
Answer: B
Explanation:
Block a site permanently
The Successful Company networkadministrator has been driven to distraction recently by a script kiddy using addresses in the 192.136.15.0/24 network to run probes of the Successful network. In this exercise, we permanently block all connections from that network.
1.From PolicyManager, select Setup > Default Threat Protection > Blocked Sites. The Blocked Sites Configuration dialog box opens.
2.On the Blocked Sites tab, click Add.
3.The Add Site dialog box opens. 3. Use the Choose Type drop-down list to select Network IP. In the Value text box, type 192.136.15.0/ 24.
4. Click OK.
The entry appears in the Blocked Sites list. With this configuration, the Firebox blocks all packets to and from the 192.136.15.0/24 network range.
Reference: Fireware Basics, Courseware: WatchGuard System Manager 10, pages 15, 34, 59, 181
NEW QUESTION # 67
......
WatchGuard Essentials (Fireware Essentials) Certification Exam is a valuable certification for both individuals and organizations. It provides an in-depth understanding of WatchGuard's network security solutions and how to implement them effectively. It also helps individuals enhance their career prospects by showcasing their expertise in network security and WatchGuard's products and services. Moreover, organizations benefit from having certified professionals who can implement WatchGuard's security solutions and protect their networks from cyber threats.
Free Essentials Exam Braindumps WatchGuard Pratice Exam: https://interfacett.braindumpquiz.com/Essentials-exam-material.html