Free Oct-2023 NS0-593 Dumps are Available for Instant Access
View All NS0-593 Actual Exam Questions Answers and Explanations for Free
NEW QUESTION # 12
Which two throughput elements are controlled by host applications? (Choose two.)
- A. concurrency
- B. latency
- C. Jitter
- D. operation size
Answer: B,C
NEW QUESTION # 13
After users start reporting the Inability to create new flies in a CIFS share, you find EMS events for
wafl.dir.size.max logged for the volume of the SVM to which the share points.
In this scenario, which action should you take to solve this issue?
- A. Increase the maximum numberof files for the volume.
- B. Increase the maximum directory size for the volume.
- C. Delete unneeded files from the directory.
- D. Move the volume to a different aggregate.
Answer: A
NEW QUESTION # 14
Your customer is running a NetApp AFF A800 system with NetAppONTAP 9.8 software and states that their
NS224 shelf is not showing with the correct shelf ID. You analyze the data and the shelf shows an
identification of "1.SHFHUXXXXXXXXXX."
What is the cause of the reported Issue?
- A. The shelf has been power cycled.
- B. The shelf had a disk replaced too quickly.
- C. A new shelf was added to the controller.
- D. The shelf was cabled Incorrectly.
Answer: C
NEW QUESTION # 15
A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G
Ethernet card in slot 4 for this purpose. The link comes up fine on node 2,but it will not come up on node 1.
You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit.
What is the cause of the customer's problem?
- A. The ports are configured for 4x10Gbit instead of 40Gbit.
- B. The port has an incorrect SFP inserted.
- C. The cable is plugged in upside down.
- D. The incorrect cable is used.
Answer: A
NEW QUESTION # 16
You created a new NetApp ONTAP FlexGroup volume spanning six nodes and 12 aggregates with a total size
of 4 TB. You added millions of files to the FlexGroup volume with a flat directory structure totaling 2 TB, and
you receive anout of apace error message on your host.
What would cause this error?
- A. All constituent volumes are full.
- B. The inode limit is exceeded in the ONTAP software.
- C. The maximum number of volume constituents has been reached in the ONTAP software.
- D. The maxdirsize Is exceeded in the ONTAP software.
Answer: B
NEW QUESTION # 17
Which two automation methods does NetApp ONTAP Select support? (Choose two.)
- A. REST
- B. Anslble
- C. PHP
- D. Docker
Answer: A,B
NEW QUESTION # 18
A system panic due to an "L2 watchdog timeout hard reset" error occurred. You have found a FIFO message
in the SP log.
Which FIFO message Is useful for Investigating this Issue?
- A. before Reset BBSP:C=00 L=00 FIFO:
- B. before NMI BBSP:C=00 L=00 FIFO: F3 F2 F1 F0 5 B2 0 0 0 80 20 E F E3 C0 C2 3 4 6 7 9 9 A
- C. ONTAP Shutdown BBSP:C=00 L=2F FIFO:
- D. BIOS exit BBSP:C=2F L=20 FIFO: 2 C8 C9 C4 24 4 6 18 7 8 11
Answer: D
NEW QUESTION # 19
Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer
version. After investigating the event logs and the SnapMirror history, you see information about delayed
updates of the SnapMirror relationships.
How would your customer prevent such problems in the future?
- A. Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
- B. Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
- C. Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
- D. Quiesce the SnapMirror relationships before upgrading the ONTAP software.
Answer: C
NEW QUESTION # 20
You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16
TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400
aggregates to the FAS8300.
In this scenario, which ONTAP license must be added to the cluster to accomplish this task?
- A. VE license
- B. S3 license
- C. FabricPool license
- D. TPM license
Answer: D
NEW QUESTION # 21
You are deploying NetApp ONTAP Select. When trying to add VMware vCenter to the inventory, you receive
the message shown below.
Credential authentication failed for x.x.x.x with: HostConnectionFailed
In this scenario, how would you correct this problem?
- A. Change the IP address of the ONTAP Select Deploy VM.
- B. Change the gateway address of the ONTAP Select Deploy VM.
- C. Change the vCenter password.
- D. Change the IP address of the vCenter server.
Answer: C
NEW QUESTION # 22
A user mentions that their home drive, that Is an export within a volume, is no longer allowing them to save
files. The drive reports that it Is full, even though It shows that minimal data is written to it.
Which statement would explain this behavior?
- A. Other files within the volume are also owned by the user, exceeding the user quota.
- B. The client system needs to remount the export to show the proper space.
- C. The mount is stale and uses a cached version of the volume.
- D. Other users wrote to this user's home drive.
Answer: A
NEW QUESTION # 23
Your customer has mounted an NFS SVM from a Linux client unci performance is very poor. The customer is
certain that they have jumbo frames enabled. They have verified an MTU of 9000 on both the Linux client and
the broadcast domain on the NetApp ONTAP 9.8 cluster.
Referring to the exhibit, which ONTAP command will help isolate a possible MTU mismatch?
- A.
- B.
- C.
- D.
Answer: B
NEW QUESTION # 24
You are trying to deploy a Connector in the AWScloud from NetApp Cloud Manager. The deployment fails
and shows the message 'Insufficient permissions to deploy Cloud Connector". You have verified the AWS
access key and the AWS secret key.
In this scenario, what Is the reason that the deployment failed?
- A. No AWS Marketplace subscription is associated with Cloud Manager.
- B. The required Identity and Access Management (IAM) policies were not Installed.
- C. The user lacks the permission to deploy within Cloud Manager.
- D. The Connector can be deployed only inAWS GovCloud (US).
Answer: C
NEW QUESTION # 25
You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail
over across subnets.
How would youaccomplish this task?
- A. Configure an equal number of UFs on each subnet.
- B. Configure a I IF failover policy for each subnet inside a single broadcast domain.
- C. Configure VIP LIFs using OSPF.
- D. Configure VIP LIFs using BGP.
Answer: D
NEW QUESTION # 26
You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing
performance issues. Upon investigation, you discover severaltype B consistency points.
Referring to the exhibit, which corrective action would address these consistency points?
- A. Convert the 2-node switchless cluster to a 2-node switched cluster.
- B. Replace the twenty-four 1.8 TB disks with twelve 4 TB disks.
- C. Create additional data LIFs.
- D. Add an additional shelf oftwenty-four 1.8 TB disks.
Answer: D
NEW QUESTION # 27 
Referring to the exhibit, what do you need to do to return the MetroCluster to a normal state?
- A. Enter the storage failover giveback command on Site B.
- B. Enter the metrocluster switchback command on Site A.
- C. Enter the storage failover giveback command on Site A.
- D. Enter the metroclustor switchback command on Site B.
Answer: B
NEW QUESTION # 28
You have recently discovered that NetApp ONTAP Cloud Manager is not sending AutoSupport messages to
NetApp.
In this scenario, what would solve this Issue?
- A. Verify that your NetApp Support site credentials are correctly added to Cloud Manager.
- B. Verify that the inbound and outbound rules allow AutoSupport on port 80.
- C. Verify that your AWScredentials are correctly added to Cloud Manager.
- D. Verify that your data LIFs allow traffic to mysupport .netapp.com on port 443.
Answer: D
NEW QUESTION # 29
You recently discovered the error message shown below in your ONTAP logs.
What should be your first action to correct this Issue?
- A. Power cycle all the disk storage shelves that contain drives of the aggregate with the my_data_vol
volume. - B. Use the storage takeover command on the storage controller that contains my_data_vol.
- C. Use the wafliron command against my_data_vol to solve the inconsistency on the volume.
- D. Determine the root cause behind the inconsistency before attempting any recovery procedure.
Answer: A
NEW QUESTION # 30
You have connection Issues from a Linux host to an AFF A400 FC LUN. You are asked by support to run the
NetApp sanlun command to provide troubleshooting information.
Which NetApp software package must be installed on the host?
- A. Inventory Collect Tool
- B. Host Utilities package
- C. Virtual Storage Console
- D. SnapDrive for UNIX
Answer: B
NEW QUESTION # 31
Your customer noticed in NetApp Active IQ that their NetApp Cloud Volumes ONTAP forAzure HA solution
is no longer sending AutoSupport messages over HTTPS. A support ticket has been opened to find out why.
No changes have been made to the Cloud Volumes ONTAP for Azure HA environment.
In this scenario, which two autosupport command parameters should be used to validate that AutoSupport Is
working properly? {Choose two.)
- A. -mail-hosts
- B. -proxy-url
- C. -to
- D. -transport
Answer: A,B
NEW QUESTION # 32
A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.
Referring to the Information shown in the exhibit, what Is the source of the problem?
- A. The aggregate aggr2 has a failed disk.
- B. The databases On Node03 must be Switched from secondary to master.
- C. The broken disk in Node03 is the source of the problem.
- D. Thev1db database is offline.
Answer: B
NEW QUESTION # 33
Your customer has deployed a two petabyte NetAppONTAP FlexGroup volume across their 4-node ONIAP
9.8 cluster. They plan to store over three billion files. They want to prevent file 10 conflicts since files are
placed into the FlexGroup volume.
In this scenario, which two NFS SVM parameters should be enabled? (Choose two.)
- A. -v3-fsid-change
- B. -v3-64bit-identifiers
- C. -v4-64bit-idantifiers
- D. -v4-fsid-change
Answer: A,B
NEW QUESTION # 34
You ate connecting a Windows Server 2019 hostto ISCSI LUNs on a 4-node AFF A250 cluster running
NetApp ONIAP 9.8 software. The host is unable to connect to the target interface, and the ONTAP event log
has the message shown below.
ISCSI: network interface identifier disabled for use; incoming connection discarded
In this scenario, what is the cause of this connection issue?
- A. The iSCSI service is not enabled on the interface.
- B. The WWPN was not added to the initiator group.
- C. CHAP isnot configured correctly for the specified initiator.
- D. iSNS is not enabled on the storage virtual machine.
Answer: B
NEW QUESTION # 35
Your customer calls you because one application is not able to access a NetApp ONTAP S3 bucket. While
reviewing the EMS log on the cluster, you see the following message:
The same credentials work in another application.
In this scenario, what would cause this problem?
- A. The application is trying to log in as an anonymous user.
- B. The application is using v4 signatures.
- C. The application is using v2 signatures.
- D. The application is trying to access using the HTTP protocol.
Answer: A
NEW QUESTION # 36
......
Network Appliance NS0-593 exam is designed for IT professionals who want to validate their skills in supporting and managing NetApp ONTAP storage systems. NS0-593 exam is a vendor-specific certification exam that focuses on testing the candidate's knowledge of NetApp storage systems, including ONTAP, and their ability to support and troubleshoot these systems.
Network Appliance NS0-593 certification exam is designed to test the knowledge and skills of support engineers who work with NetApp ONTAP storage systems. NS0-593 exam is designed to test the candidate’s ability to install, configure, and troubleshoot NetApp storage solutions in a complex environment. The NS0-593 exam is part of the NetApp Certified Support Engineer ONTAP Specialist certification, and passing NS0-593 exam is a step towards achieving this certification.
The Most In-Demand NS0-593 Pass Guaranteed Quiz : https://interfacett.braindumpquiz.com/NS0-593-exam-material.html